The FBox library regarding the exchanges of datas with the Panels ESA (PCD7.D7xx) and PCD controllers is available for PG5 2.0 and can be used also in PG5 2.1, PG5 2.2 and PG5 2.3. The FBox library is attached to this FAQ On PG5 2.1, PG5 2.2 and PG5 2.3 a warning will be shown on the library manager 'BAD VERSION NUMBER' but it's possible to use the FBoxes in Fupla without problems
Once the application has been downloaded in the PCD it isn't possible to modify a value because the keyboard doesn't appear. To solve the problem you have two possibilites: 1: Copy the two files keypad.teq and alpha.teq in to your web editor project. 2: Use the default keypad.teq and alpha.teq stored on the MB-Display
? No, to be able to keep old projects unchaged, a 'Modbus 1' library, version 1.85 (compatible to V 1.4, V2.0, V2.1 and V2.2) is available from Engiby and use the same license key as "Modbus 2". In other words, once Modbus 2 is installed, Modbus 1.82/1.83/1.84/1.85 can also be used without a new key. 'Modbus 1' library, version 1.82 is usable only on PG5 2.0 'Modbus 1' library, version 1 [...] the Engiby libraries is required for PG5 2.0.150 (PG5 2.0 SP1). This FAQ contains the link to download the libraries (in order to have a fast solution for concerned customer SBC exceptionally does have
PCD3 / Sxxx How can a BACnet Operator Workstation (B-OWS) know that a PCD has been restarted? (FAQ #101452) There's the possibility to configure a "Restart [...] the “Restart Notification Recipients” list as shown in the below attached picture. With this setting the PCD will inform the BOW after a restart. Please makte sure that the device you want to alarm
PCD3 / Sxxx How can a BACnet Operator Workstation (B-OWS) know that a PCD has been restarted? (FAQ #101452) There's the possibility to configure a "Restart [...] the “Restart Notification Recipients” list as shown in the below attached picture. With this setting the PCD will inform the BOW after a restart. Please makte sure that the device you want to alarm
PCD3 / Sxxx How can a BACnet Operator Workstation (B-OWS) know that a PCD has been restarted? (FAQ #101452) There's the possibility to configure a "Restart [...] the “Restart Notification Recipients” list as shown in the below attached picture. With this setting the PCD will inform the BOW after a restart. Please makte sure that the device you want to alarm
. PCD1.T240 Remote I/O for S-Bus (obsolete) Documentation Good to know Not all PCD2.xxx modules are supported by the PCD1.T240 firmware. Modules that can be used: PCD2.E11x, A4xx, A2xx, W1xx, W2xx, W4xx. [...] Product Index Archive PCD1 Txxx General
PCD6.E100, PCD6.E610, PCD6.E611 or PCD6.A350 (FAQ #100264) These 4 digital I/O cards have all an address [...] . Nevertheless it is possible measuring the range 0..20 mA with the analogue input modules for PCD systems. Why do the SBC input modules have a range of 0..20 mA? One advantage of measuring the [...] the used power supply does not have the +/-15V the analogic carts can not work. With the PCD4/6.N200 supply it is not possible to use analogic cards. You will need the PCD4/6.N210 supply
PCD6.E100, PCD6.E610, PCD6.E611 or PCD6.A350 (FAQ #100264) These 4 digital I/O cards have all an address [...] . Nevertheless it is possible measuring the range 0..20 mA with the analogue input modules for PCD systems. Why do the SBC input modules have a range of 0..20 mA? One advantage of measuring the [...] the used power supply does not have the +/-15V the analogic carts can not work. With the PCD4/6.N200 supply it is not possible to use analogic cards. You will need the PCD4/6.N210 supply
7.T160 D-Sub 9pin on PCD Port 2 on PCD3.M3 and M6 A=RxD /TxD-N green D pin 8 D B=RxD /TxD-P red D/ pin 3 /D Example [...] 3): PCD3.M5540 (D-Sub "S-Net", port 3) PCD2.M5540, X3, port2 equipped with a PCD7.F110 pin 3 terminal 2 pin 8 terminal 1 [...] inverted. This wrong label is present on the schema of the housing and directly on the pins. Problem When a PCD7.T162 produced before week 22 of 2011 (30.05.2011) has a 24V DC supply voltage
