English: This patch solve a issue in relation to Saia PCD Supervisor installations having multiple IP Interface adapters installed. The problem could occur after a station restart, and lead to [...] interfaces on PC platforms). In these cases, another available interface or no interface may be used for that station. Patch is working for Saia PCD Supervisor 2.1 and 3.0 Deutsch: Der Patch behebt ein Problem auf Saia PCD Supervisor-Installationen bei welchen mehrere IP-Interface-Adaptern installiert sind. Das Problem könnte nach einem Neustart der Station auftreten, und bewirken dass die
Configuration Manual: Saia PCD® Supervisor V2.0 Version XXX04: - Chapt. 6.3.6 “Enhanced PG5 Import Wizard” added - Chapt. 6.6.7 “New Px / responsiv elements” added - Chapt. 7.4 “HTML 5 Enhancements” added - Chapt. 7.4.1 “New reporting functions” added - Chapt. 7.5 “Cloud connector” added - Chapt. 7.6 “Bulk deploy” added - Chapt. 7.7 “VykonPro modules“ added - Chapt. A.4 “What is in V1.2 new” added - Chapt. A.5 “What is in V2.0 new” added - Chapt. A.6 “What will come with version V2.1” added Version XXX05: - Chapt. 3.15 “General Data Protection Regulation(GDPR)” added
with PG5 V2.1.200, but not back again Once a project has been opened with PG5 V2.1.200, it is not possible to open it again with the previous versions. As this new version contains no major changes [...] diagnostic information of a PCD3.W745 on a PCD3.T760? (FAQ #101697) When the 4 channels analog carte PCD2.W745 is used on a [...] ): Why does my PCD7.F7500 not work on my PCD2.M5540? (FAQ #101655) In some cases it is possible that a PCD7.F7500 is not
.1xx must be installed again in PG5 2.2.2xx. BACnet revision 14: BACnet revision 14 requires a PCD and BACnet FW >= 1.28.xx. The PCD and BACnet FW >= 1.28.xx does not support BACnet revision 9 [...] Browser Panel: 1.18.28 Please also respect the PCD hardware dependency; a recent PCD3 firmware version that is required (see firmware download page). The "Alarming 2" feature is only supported on Saia PCD [...] to the panel is on OFF mode. 2.- The only panels where it is possible to re-activate such remote access are : PCD7.D412DTPx and PCD7.D4xxxT5F. All the others (a part from someOEMs) do not
: BACnet revision 14 requires a PCD and BACnet FW >= 1.28.xx. The PCD and BACnet FW >= 1.28.xx does not support BACnet revision 9. BACnet revision 9 requires a PCD and BACnet firmware = 2.3.196 can no [...] 5 Online configurator? (FAQ #102040) Due to a production error it's possible that PCD2.M5540 which have been produced in [...] ) On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s
: BACnet revision 14 requires a PCD and BACnet FW >= 1.28.xx. The PCD and BACnet FW >= 1.28.xx does not support BACnet revision 9. BACnet revision 9 requires a PCD and BACnet firmware = 2.3.196 can no [...] 5 Online configurator? (FAQ #102040) Due to a production error it's possible that PCD2.M5540 which have been produced in [...] ) On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on [...] : PCD2.W340 Old Fbox NOT anymore supported., in Block: BL 425E2C0E, Page: 1, FBox: PCD2.W34 Reason This error is caused by a bug in the FBox library for the analogue modules. The
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on [...] : PCD2.W340 Old Fbox NOT anymore supported., in Block: BL 425E2C0E, Page: 1, FBox: PCD2.W34 Reason This error is caused by a bug in the FBox library for the analogue modules. The
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on [...] : PCD2.W340 Old Fbox NOT anymore supported., in Block: BL 425E2C0E, Page: 1, FBox: PCD2.W34 Reason This error is caused by a bug in the FBox library for the analogue modules. The
(PCD7.D776 Rev. 3) or by a hardware modification (PCD7.D776 Rev. 2). For updating the boot- and firmware version, please use the PCD8.D81W ( VTWIN) version 5.18 (or newer) which can be optained from [...] (port 0) of a PCD2.M110 (or a PCD2.M120) but not on the following systems: PCS1, PCD2.M150/M170/M480/M5xx0 or on a PCD3. Reason The PGU mode of recent PCD systems is no longer based on the P [...] .M150 and PCD2.M170: Modify your communication cable (Pin 6 should not be used, Pin 6 of PGU port =0). In the PCD program you need to add a "SASI Slave Mode D" with the parameters: RS 232, 9600, Parity, 7
