. When updating from a PCD6.M1/M2 CPU to a PCD6.M3, the memory module as well and the firmware versions of all CPU's had to match (for more details please refer to the attached document.). The update to [...] . Systems introduced before 2003: All PCD1, PCD2 (except PCD2.M480), PCD4 and PCD6 as well as PCS1 classic contollers do have a baud rate limitation of 38.4 kB/s on each serial port. For [...] (PCD2.M480 and PCD3.xxxx): Due to faster hardware there are much higher baud rates possible on the serial ports (up to 115 kB/s)! There is only one restriction regarding UART sharing left: On a PCD
. When updating from a PCD6.M1/M2 CPU to a PCD6.M3, the memory module as well and the firmware versions of all CPU's had to match (for more details please refer to the attached document.). The update to [...] . Systems introduced before 2003: All PCD1, PCD2 (except PCD2.M480), PCD4 and PCD6 as well as PCS1 classic contollers do have a baud rate limitation of 38.4 kB/s on each serial port. For [...] (PCD2.M480 and PCD3.xxxx): Due to faster hardware there are much higher baud rates possible on the serial ports (up to 115 kB/s)! There is only one restriction regarding UART sharing left: On a PCD
. When updating from a PCD6.M1/M2 CPU to a PCD6.M3, the memory module as well and the firmware versions of all CPU's had to match (for more details please refer to the attached document.). The update to [...] . Systems introduced before 2003: All PCD1, PCD2 (except PCD2.M480), PCD4 and PCD6 as well as PCS1 classic contollers do have a baud rate limitation of 38.4 kB/s on each serial port. For [...] (PCD2.M480 and PCD3.xxxx): Due to faster hardware there are much higher baud rates possible on the serial ports (up to 115 kB/s)! There is only one restriction regarding UART sharing left: On a PCD
. When updating from a PCD6.M1/M2 CPU to a PCD6.M3, the memory module as well and the firmware versions of all CPU's had to match (for more details please refer to the attached document.). The update to [...] . Systems introduced before 2003: All PCD1, PCD2 (except PCD2.M480), PCD4 and PCD6 as well as PCS1 classic contollers do have a baud rate limitation of 38.4 kB/s on each serial port. For [...] (PCD2.M480 and PCD3.xxxx): Due to faster hardware there are much higher baud rates possible on the serial ports (up to 115 kB/s)! There is only one restriction regarding UART sharing left: On a PCD
/IP settings of the PCD2.M5 CPU with the eDisplay (PCD7.D3100E), when are the new TCP/IP settings are activated? (FAQ #101168) The new TCP/IP settings are valid and activated as soon as the changing of the number is finished by pressing in the center of the joystick of the eDisplay. A restart or a power off/on of the PCD [...] Product Category HMI Room operating device PCD7.D1000 General
2015. The PCD7.D120 displays are not fully compatible with the PCA2.Dxx: Mechanical: the dimension of the cut out is smaller than the D12, so if you have to replace an existing PCA2.D12 with a PCD7.D120, you have to use an adaptation frame for cut out 24.5 x 48.5 mm (type 4 108 4836 0) Features: The PCD7.D120 is a 6-digit LED display with decimal point; the PCA was 4-digit only Programming: The IL code and FBoxes for the PCA2.Dxx are not compatible with the PCD7.D120. To use the PCD7.D120, you need FBoxes contained in PG5 starting from version 1.1.100. Earlier versions of PG
. PCA programm update when replacing PCA2.D12 with PCD7.D120 (FAQ #100668) The attachment contains a program example for [...] the cut out is smaller than the D12, so if you have to replace an existing PCA2.D12 with a PCD7.D120, you have to use an adaptation frame for cut out 24.5 x 48.5 mm (type 4 108 4836 0) Features: The PCD7.D120 is a 6-digit LED display with decimal point; the PCA was 4-digit only Programming: The IL code and FBoxes for the PCA2.Dxx are not compatible with the PCD
7.D23x are compatible with PG5 1.4.200. Symptom When programming a PCD with a PCD7.D23x (a pilot- or prototype version) with PG5 1.4.200, it may happen that the display jumps back to the root [...] protocol mode (RS485, "FTP" mode) on all PCD3 RS 485 ports (also on ports F2xx) must TEMPORARY be done with a special setting in the Advanced section of the SW Settings of the PG5. For the [...] When an element is configured as Integer with the format ##### (without dot) the value of the register is wrongly displayed on the terminal. This is a FW bug in the actual version of the PCD3.M_ and PCD2
.4 (R.H. sensor) will be adapted accordingly in the next release. 4.2.3 Temperature sensor Temperature sensor used in PCD7.D290 is active and supplies as output a voltage of 10.0 mV/°C; this [...] accuracy value: ± 1°C (± 1.5°C in the worse case) 4.2.4 R.H. sensor R.H. sensor used in PCD7.D290 is capacitive and supploes as output a capacity in the range 161.6 pF at 0% R.H. and 193.1 p [...] (PCD7.D23x and PCD7.D290) are connected to a RS 485 port (Bus terminal) of a PCDx.F2xx module, the communication doesn't work. Only one of the displays is available, the other one(s) is (are) not accessible
PCD7.D1000 Embedded nano-browser (eDisplay for PCD2.M5xx0) Documentation Firmware Good to know There is a "Getting started with eDisplay" example available in the Getting Started section for PG5 2.0. For downloading the firmware of a PCD [...] /IP settings of the PCD2.M5 CPU with the eDisplay (PCD7.D3100E), when are the new TCP/IP settings are activated? (FAQ #101168)
