version 2.6.165. Symptom After having changed the operation mode of a PCD7.L60x Room controller from "autonomous" to "slave" the output values for the heating and cooling signal are not [...] replacing a DX system by a PCD without the need to replace all the XT extensions, too. Therefore the FBox library for the Johnson Controls JCI N2-Bus is designed to connect XT 9100 extension modules (where [...] N2-Bus between PCDs, but it is not possible to connect a PCD to a SCADA system from JCI or to a JCI NAE or NCM controller (because this SCADA or NAE is first of all reading a Johnson ID together with
. Since the Windos OS (Windows95, Windows98, Windows Millenium, Windows 2000, Windows XP) do handle the interface to the COM ports in a different that DOS does, the communication between the PC and PCD isn [...] commercially available products. PCD8.P3/P4 Programming Tool (obsolete, replaced by PG5) Documentation Last official PG3 version 2.1 (DOS, Win 3.11, 95, 98) Intermediate PG3 version $2.19 (DOS,
the situation that the PCD code can’t be executed correctly. Solution - Use PG5 2.1.200 or higher. - If PG5 2.1.100.100 is used: Download and unzip the [...] transmit or receive FBoxes (or in case a PC is used, by interpreting the tracewin files). This phenomenon can be observed on PCD1.M1x5, PCD2.M150, PCD2/4.M170 and PCS1 systems (with firmware which are [...] 20k Honeywell with PCD2.W220Z02 or PCD3.W220Z03 Ni1000 L&S with large temperature range on PCD2/3.W220 or PCD2/3.W340 Ni1000 Tk 5000 with PCD2/3.W360 Ni200 DIN 43760 with PCD2/3.W350 Potentiometer 1
the situation that the PCD code can’t be executed correctly. Solution - Use PG5 2.1.200 or higher. - If PG5 2.1.100.100 is used: Download and unzip the [...] transmit or receive FBoxes (or in case a PC is used, by interpreting the tracewin files). This phenomenon can be observed on PCD1.M1x5, PCD2.M150, PCD2/4.M170 and PCS1 systems (with firmware which are [...] 20k Honeywell with PCD2.W220Z02 or PCD3.W220Z03 Ni1000 L&S with large temperature range on PCD2/3.W220 or PCD2/3.W340 Ni1000 Tk 5000 with PCD2/3.W360 Ni200 DIN 43760 with PCD2/3.W350 Potentiometer 1
is recommended to use a VGA S-Web PCD7.D410V panel and taking advantage of the integrated WebServer of the PCD. PCD7 / D8xx Why has the VT Win project such a [...] bigger (100-200MBytes). Problem The size of the project increase after storing to a really hughe size. Reason If unicode fonts are used which are not present in the PC
#100589) Years ago a commissioning tool for some motion modules (e.g. PCD2.H32x) has been developped and was set to the beta phase. Due to a lack of interest and feedback from the market this tool was never officialized and is not supported any more. What was MotionX? The software packet MotionX (PCD8.H50000E) has been created for commissioning complex motion modules such as the PCD2.H32x. The software was designed to support the user to find e.g. the optimal PID settings by visualizing graphs of recorded
one character in it (which would be 10 bytes in total) will use 10 blocks (which is around 10 kByte on the INTFLASH of a PCD1.M2xxx or a "blue flash module"). The amount of "unusable" memory is [...] memory modules and on the INTFLASH (if available). These are: PCD1.M2xxx (INTFLASH) PCD2.R6000 PCD3.R550, PCD3.R551, PCD3.R561 PCD3.R600 PCD7.R550, PCD7.R551, PCD7.R561 INTFLASH of a PCD3 Compact or a PCD1.M2
PCD7 Why I have a blue screen after a panel reboot on WES7 panel after activation of the HORM mode (Hibernate Once ResumeMany)? (FAQ #101976) You have a PCD [...] Product Category Remote I/O PCD7.Lxxx S-Bus RIO General
The RIO modul PCD7.L100 / L 200 doesn't respond. It is frozen , all the LED are switch off and it doesn't communicate anymore! After a powerup the RIO communicates again properly. This phenomenon occurs in an enironment with electronmagnetic noises. The very new PCD7.Lx00 have a filter which cures that problem. If it isn't possible to reduce the noises, try to change the PCD7.Lx00 module, the new one should be at least of the version S 18 (stamp on the modul).
BACnet specific information The BTL certificate for: PCD7.LRL2, PCD7.LRS4, PCD7.LRS5 is stored here : App software for Android devices Firmware for PCD7.LRxx BACnet Room controllers Room operation units Good to know To use the PCD7.LRxx BACnet Room controller you need minimum the versions: PG5: PG5.2.2.200 Version or [...] 5 application program toggles cyclically a Flag where the Flag is mapped to a BACnet BI object ‘PCD-Input reference’ 2. If the BACnet stack is running, then the BACnet stack copies the ‘PCD-Input reference’ of
