: BACnet revision 14 requires a PCD and BACnet FW >= 1.28.xx. The PCD and BACnet FW >= 1.28.xx does not support BACnet revision 9. BACnet revision 9 requires a PCD and BACnet firmware = 2.3.196 can no [...] 5 Online configurator? (FAQ #102040) Due to a production error it's possible that PCD2.M5540 which have been produced in [...] ) On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s
level Device Configurator: Support new IO modules - PCD2/3.W380 - PCD2.G200 - PCD7.W600 - PCD7.R610 Fupla Define groups and separators in the Page Navigator view Several [...] following new features and modifications have been implemented in the patch 1 for PG5 2.1.200: Project Manager - RIO and device names can now begin with a digit - In the TCP/IP setting table, device is [...] with PG5 V2.1.200, but not back again Once a project has been opened with PG5 V2.1.200, it is not possible to open it again with the previous versions. As this new version contains no major changes
commercially available products. PG5 2.2 licensing PG5 2.2, use the same licensing mode as on PG5 2.1 There is a PG5 2.2 license file ‘USER.KEY' and there is a PG5 User Registration, file 'REGISTRATION.KEY'. PG5 2.2 needs a new ‘USER.KEY'. The ‘USER.KEY' file from PG5 2.1, PG5 2.0 or PG5 1.4 does not work on PG5 2.2. The same 'REGISTRATION.KEY' which was used in PG5 2.1 can be used also in PG5 2.2. To use PG5 2.2 with a PG5 demo license, PG5 must contain a PG5 User Registration. If PG5 2.2 is used with a
commercially available products. PG5 2.2 licensing PG5 2.2, use the same licensing mode as on PG5 2.1 There is a PG5 2.2 license file ‘USER.KEY' and there is a PG5 User Registration, file 'REGISTRATION.KEY'. PG5 2.2 needs a new ‘USER.KEY'. The ‘USER.KEY' file from PG5 2.1, PG5 2.0 or PG5 1.4 does not work on PG5 2.2. The same 'REGISTRATION.KEY' which was used in PG5 2.1 can be used also in PG5 2.2. To use PG5 2.2 with a PG5 demo license, PG5 must contain a PG5 User Registration. If PG5 2.2 is used with a
commercially available products. PG5 2.2 licensing PG5 2.2, use the same licensing mode as on PG5 2.1 There is a PG5 2.2 license file ‘USER.KEY' and there is a PG5 User Registration, file 'REGISTRATION.KEY'. PG5 2.2 needs a new ‘USER.KEY'. The ‘USER.KEY' file from PG5 2.1, PG5 2.0 or PG5 1.4 does not work on PG5 2.2. The same 'REGISTRATION.KEY' which was used in PG5 2.1 can be used also in PG5 2.2. To use PG5 2.2 with a PG5 demo license, PG5 must contain a PG5 User Registration. If PG5 2.2 is used with a
.ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s [...] one of the two Ethernet ports to avoid a bad behavior on BACnet. The activation and selection of the used Ethernet port for BACnet communication on the PCD3.M6860 is done in PG5 2.2 or PG5 2 [...] level Device Configurator: Support new IO modules - PCD2/3.W380 - PCD2.G200 - PCD7.W600 - PCD7.R610 Fupla Define groups and separators in the Page Navigator view Several
.ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s [...] one of the two Ethernet ports to avoid a bad behavior on BACnet. The activation and selection of the used Ethernet port for BACnet communication on the PCD3.M6860 is done in PG5 2.2 or PG5 2 [...] level Device Configurator: Support new IO modules - PCD2/3.W380 - PCD2.G200 - PCD7.W600 - PCD7.R610 Fupla Define groups and separators in the Page Navigator view Several
.ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s [...] one of the two Ethernet ports to avoid a bad behavior on BACnet. The activation and selection of the used Ethernet port for BACnet communication on the PCD3.M6860 is done in PG5 2.2 or PG5 2 [...] level Device Configurator: Support new IO modules - PCD2/3.W380 - PCD2.G200 - PCD7.W600 - PCD7.R610 Fupla Define groups and separators in the Page Navigator view Several
-Box libraries from PG5 2.2.1xx must be installed again in PG5 2.2.2xx. BACnet revision 14: BACnet revision 14 requires a PCD and BACnet FW >= 1.28.xx. The PCD and BACnet FW >= 1.28.xx does not support [...] Browser Panel: 1.18.28 Please also respect the PCD hardware dependency; a recent PCD3 firmware version that is required (see firmware download page). The "Alarming 2" feature is only supported on Saia PCD [...] to the panel is on OFF mode. 2.- The only panels where it is possible to re-activate such remote access are : PCD7.D412DTPx and PCD7.D4xxxT5F. All the others (a part from someOEMs) do not
-Box libraries from PG5 2.2.1xx must be installed again in PG5 2.2.2xx. BACnet revision 14: BACnet revision 14 requires a PCD and BACnet FW >= 1.28.xx. The PCD and BACnet FW >= 1.28.xx does not support [...] Browser Panel: 1.18.28 Please also respect the PCD hardware dependency; a recent PCD3 firmware version that is required (see firmware download page). The "Alarming 2" feature is only supported on Saia PCD [...] to the panel is on OFF mode. 2.- The only panels where it is possible to re-activate such remote access are : PCD7.D412DTPx and PCD7.D4xxxT5F. All the others (a part from someOEMs) do not
