System Catalgue: Book A Chapter 3.2 PCD7.LRxx BACnet room controllers can be configured and commissioned via an Android app
The serial ports of the PCD2.M480 does allow to communicate up to 115 kB/s.
For BCU1 protocol not all communication interfaces of a PCD3 or a PCD2.M5540 can be used. On the other hand there is no problem using the newer FT1.2 protocol which is supported by all RS232 interfaces of the PCD3 and the PCD2.M5540.
Years ago a commissioning tool for some motion modules (e.g. PCD2.H32x) has been developped and was set to the beta phase. Due to a lack of interest and feedback from the market this tool was never officialized and is not supported any more.
The CPLD version < HQ4 of the PCD2.H31x (HW version ≥ B) is not compatible with the I/O bus of the PCD2.M170 and the PCD2.M480. The CPLD of the modules has to be updated in Murten in order to use the H31x module on a PCD2.M170 or a PCD2.M480.
If once the Software Watchdog is configured on a PCD2.M150, the system can't be started any more until the FW will be changed to either an older version (not recommended) or to the latest version 0E3 (recommended)!
The analogue input modules PCD2.W745 and PCD3.W745 do have a terminal 16 (GND) which is not documented in version 1 of the manual 27/796.
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on [...] : PCD2.W340 Old Fbox NOT anymore supported., in Block: BL 425E2C0E, Page: 1, FBox: PCD2.W34 Reason This error is caused by a bug in the FBox library for the analogue modules. The
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on [...] : PCD2.W340 Old Fbox NOT anymore supported., in Block: BL 425E2C0E, Page: 1, FBox: PCD2.W34 Reason This error is caused by a bug in the FBox library for the analogue modules. The
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on [...] : PCD2.W340 Old Fbox NOT anymore supported., in Block: BL 425E2C0E, Page: 1, FBox: PCD2.W34 Reason This error is caused by a bug in the FBox library for the analogue modules. The
