Why the PCD7.W600 analogue input module doesn’t work on a PCD2.M4x60?

FAQ #101992

Due of an error in the hardware the first series (hardware version A and B) of the PCD2.M4x60 is not able to use the PCD7.W600 analogue input module.
The error was fixed in the hardware version C of the PCD2.M4x60.



PCD2 / M4x60

Last update: 31.10.2016 14:59

First release: 31.10.2016 14:59

Views: 4

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.