What is the signification of the history entry "ESIO CFG FAIL nn"?
FAQ #101778
In case of a configuration problem with an Smart Ethernet RIO (PCD3.T665 or PCD3.T666) an according error message is displayed in the PCD history and the PCD stays in HALT. This FAQ lists the signification of the number after the "ESIO CFG FAIL" message.
The following table lists the signification of the number of the ESIO CFG FAIL nn
| ESIO CFG FAIL | nn | Ether-S-IO configuration failure reason |
| 0 | ESIO CFG ERROR oder ESIO Driver not loaded | |
| 1 | ESIO OUT OF RECOURCE | |
| 2 | ESIO STATE ERROR | |
| 3 | ESIO PERMNGR ERROR | |
| 4 | ESIO TOO MANY CI | |
| 5 | ESIO UNKNOWN ERROR | |
| 6 | ESIO CLIENT DRIVER NOT READY | |
| 7 | ESIO CLIENT NO RESSOURCE | |
| 8 | ESIO ERROR SLAVE ADDRESS | |
| 9 | ESIO ERROR SLAVE EXISTING | |
| 10 | ESIO ERROR TLG ID | |
| 11 | ESIO ERROR TLG EXISTING | |
| 12 | ESIO ERROR TLG LENGTH | |
| 13 | ESIO ERROR TFR ID | |
| 14 | ESIO ERROR DBX VERSION | |
| 15 | ESIO ERROR SLAVE NUMBER | |
| 16 | ESIO NO SLAVE CONFIG |
Remark
Please note that the first PCD firmware which provides this information is the version 1.16.69; previous firmware versions did not correctly indicate the "nn" number but only 0 or 1.
Categories
PCD3 / T665 | T666
Last update: 28.05.2015 17:26
First release: 06.07.2012 14:53
Views: 28288
