What are the differences between S-Energy Manager image 1.06 and 1.08?
FAQ #101634
In January 2012 a new image and firmware for the S-Energy Manager has been released. This FAQ lists the main differences between these versions.
S-Energy Manager image 1.08 (January 2012)
- Firmware version 1.18.07.04
- The auto-scaling of the live trend was not working with firmware 1.18.07
- A "phase error" on one phase of a counter caused an error indication or all
three phases
- After a "Restore to default" not all parameters were correctly restored - S-Web Editor project version 2.01.07
- Some html tags were not correcly displayed when viewing the Web project
on Chinese PCs - Application running inside the Manager version 1.08.02
- Print works again after a “Save config”Support of printing reports
S-Energy Manager image 1.06 (September 2011)
- Firmware version 1.18.07
- Support of the "Easy Install tool" for updating the application
and S-Web Editor project
- Support of printing reports (if the IP of a printer is configured
and the printer supports the protocol PCL 5c or PCL 6)
- Possibility of measuring energy over pulse inputs of the S-Energy Manager
- Reset "min / max" sets to current value (before always to '0')
- Default size for heap1 and heap2 decrease to 512kB each (before it was 768kB)
- Reduced amount of external font files to a maximum of 24
Firmware version 1.16.37 (July 2011)
At this time no image version was released.
- The amount of groups has been increased to 32 with 64 members each
- The display of the month February has been corrected
- Corrected change of months
- Automatical display of the first found S-Bus address after a reboot
- Corrected calculation of group energy consumptions
Categories
PCD7 / D4xxE (Energy Manager)
Last update: 01.06.2015 03:45
First release: 12.07.2011 15:15
Views: 42716