It’s possible to use a PCD7.K413 cable to connect a PCD to a MB-Panel (PCD7.D4) over RS232?
No, the PCD7.D413 cable has the signal Rx/Tx and RTS/CTS crossed (in relation to the PCD7.D4 panel).
The RS232 Port of the PCD7.D4 panel needs the signals:
Rx, Tx, GND, RTS, and CTS.
RS 232 Port on the PCD7.D4 panel:
PCD7 / Kxxx
PCD7 / D4xx (MB Panel)
Last update: 27.05.2015 17:49
First release: 24.06.2009 07:25