Is it possible to use two different TCP/IP addresses for the two TCP/IP connectors of the PCD2.M5 CPU?

FAQ #101097

No, the PCD2.M5 CPU supports only one TCP/IP address. The two Ethernet connectors ETH1 and ETH2 do act as a switch.



If you need to have two different TCP/IP addresses then you have to use a PCD2.M480 with two PCD7.F655 modules.

For more information please refer to the FAQ 100785



xx7 Series / Communication

Communication / Ether-S-Bus

PCD2 / M5xxx

Last update: 24.05.2015 21:20

First release: 06.01.2009 08:01

Views: 4944

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.