Why goes the PCD3 in HALT with a BUS Error when changing the Profi S-Bus configuration in the hardware settings

FAQ #100828

Changing the Profi S-Bus settings puts the CPU in HALT with a BUS Error


If there is a Profi S-Bus configuration already running on a PCD3 and some settings in the "Hardware Settings" are changed. Per example check / uncheck PGU, the CPU goes in HALT with a Bus Error after the download.

This problem is related to a problem in the firmware

The next official firmware >03C will correct this problem. As workaround the PCD3 has to be restarted after the download of the new "Hardware Settings".




Last update: 30.05.2015 03:54

First release: 16.11.2007 14:35

Views: 2785

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.