How to connect two-wire current converters?

FAQ #100623

The analogue input modules for current inputs can be used together with four-wire current converters and also with two-wire current converters.

 

How to connect a two-wire current converter?
Usually 2-wire current converters (0..20 mA or 4..20 mA) are to be supplied with 24V. The converter itself will then limit the current according to the unit to be converted.
For this system to work the wiring scheme below needs to be applied. Note that the converter is serially connected to the input module.
§ix100435§

 

Note
Never connect the 24V directly to the input of the analogue input module because this could damage the input module!

 

Related Files:

Categories

PCD3 / Wxxx

Last update: 15.04.2015 19:36

First release: 10.11.2006 10:16

Views: 1449

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download