The USB-port doesn't work anymore after installing PG5 1.4.100

FAQ #100544

There are a few known cases where the USB Port didn't work anymore after installing PG5 1.4.100. The error message "Port Not Open" is displayed!

 

Problem
After installing PG5 1.4.1xx, the USB port isn't working with PG5 1.4 nor with PG5 1.3 (where it worked before). Unistalling PG5 1.4 doesn't solve the problem.

 

Solution
In this case it is necessary to uninstall the USB-Driver completly. On your PC browse to Start menu -->  Settings --> Control Panel --> System --> Hardware -->  Device manager and chose  DriverX USB / Saia driver / Uninstall.
Reinstall the USB-Driver which is attached to this FAQ before plugging in the PCD again.

 

Related Files:

Categories

PG5 1.x

Last update: 30.05.2015 13:42

First release: 13.03.2006 16:36

Views: 1450

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download