Why doesn't the input card work correctly?

FAQ #100456

Per example: Some input LED's are on even if the signal is low on the input.

 

Problem
After connecting some input wires the LED's are in a undefined status. Some or all LED's are on, even if the signal is low on the input.

Reason
In most cases problems like this are wiring problems. Per example L is not connected correctly.

Solution
The "L" has to be connected to the minus in source operation mode (positiv logic) and to the plus in sink operation mode (negativ logic).

 

Categories

PCD2 / Exxx

Last update: 11.05.2015 13:03

First release: 29.09.2005 06:56

Views: 765

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download