After download CPU goes in Halt: checksum fail!

FAQ #100249

When using PCD1 with a flash additionnal memory, after program download the CPU goes in halt, with the error: checksum fail if the CPU name starts with a number and/or contains an accent (eg: 1er étage)!!

Accent in CPU and file name should not be used, also CPU name should not start with a number!

 

This problem occurs on PCD1.M130  with a 1 Mbits flash memory (FW 075 and 080). It occurs also on the PCS1.

Note: If a Ram memory is used there is no problem!

Solution: Change the CPU name, no starting with a number and containing no accents!
A correction should be done in PG5 1.3  and / or in the FW.

 

Categories

Local FAQ Deutschland / Fupla

Local FAQ Deutschland / Project Manager

Last update: 21.05.2015 06:36

First release: 27.10.2004 10:14

Views: 1381

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download