Is it possible to turn off the hardware flow control (RTS-CTS) for RS 232 on a XX7?

FAQ #100158


No! The hardware flow control is allways on so it is necessary to wire the signals RTS-CTS correctly! If the XX7 communicates with a device that does not support this kind of flow control, RTS-CTS can be bridged on the PLC.



xx7 Series / Communication

Last update: 27.05.2015 13:01

First release: 21.06.2004 15:14

Views: 3109

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.