Symbol Editor) Snet52.exe Fix the channel address for the devices PCD2.M4560, PCD2.M4160 Srio52.exe Now supports PCD3.T668 for Import RIOs command. Sasm52.dll Improved handling of strings containing nested double quotes. Avoid error message when downloading an empty fupla file in PCD7.D443WT5R. Corrected creation of DB S.CPU.OnlineAdjustParamAddsList for additional FBox libraries used in E [...] SRMDB52.dll Fix a drag &drop symbole trouble in the graftec files. Fix the Graftec editor Server Busy Error (SBCSC-94). Snet52.exe Fix the channel number for PCD2.M4560 slave. (Now use the
This firmware must be used on a PCD3.M6860 and PCD3.M6880 on the extension CPU To update the firmware on a PCD3.M6860 and PCD3.M6880: It is mandatory to update first the extension firmware to 1.24.59 before to update the firmware of the main CPU with 1.25.59. Both FW (main and extension) can be updated over the standard USB port. The firmware for the main CPU is the same as the PCD3.xx60 firmware.
PCD3.M6860 with hardware revision < D: it's not possible to use a FW 1.25.xx or higher on this PCD Use the FW 1.24.59 on this PCD
New FBoxes for "variable fan speed" function, which can only be used with PCD7.L60x-1 controllers from FW SV3.00. Corrections/modifications: Since V2.6.810: - Minimum value for max. Fan limited to step 1 in 'Fan Configuration' and 'Fan Room 3', that no problem with deactivation of the cooling or heating output can be created anymore. (If fan max speed will be set to 0, then a safety function will be activated and the heating output will be deactivated) - Bugfix for M/S-Mode in 'HVC Room' FBox -------------------------------------------------
