Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O screw terminal block, 8-pole up to 2.5 mm2, labelled 1 to 8, for PCD3.M9x and PCD3.C9x green connector type "A"
Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O screw terminal block, 10-pole up to 2.5 mm2, labelled 1 to 10, for PCD3.M9x and PCD3.C9x green connector type "A"
Plug-in terminal blocks for the IEC-Controller PCD3.M6893 Plug-in spring terminal block, 8-pole 0.2…2.5 mm2 (black block) "AB8"
Plug-in terminal blocks for PCD3 I/O modules Plug-in spring terminal block, 8-pole up to 2.5 mm2 (orange block) for PCD3.M3/..M5/..M6 and PCD3.T66x
Plug-in terminal blocks for the IEC-Controller PCD3.M6893 X1 – CAN bus terminal Plug-in spring terminal block, 3-pole, 0.14…1.5 mm2 (black block), labelled 0 to 2
10 Plug-in terminal blocks for the IEC-Controller PCD3.M6893 X0 – Communicatio interfaces: Slot A Plug-in spring terminal block, 10-pole, 0.14…1.5 mm2 (black block), labelled 0 to 9
BACnet FW and coresponding PCD FW for PCD1.M2220-C15, PCD1.M2160, PCD2.M4x60, PCD3.Mxx60 and PCD3.M6880 The FW >= 1.28.xx does support the BACnet standard revision 14. This firmware should [...] this release The Memory Module PCD7.R562 or PCD3.R562 is required to run this FW (PCD7.R560, PCD7.R561, PCD3.R560, PCD3.R561 are not supported anymore) Existing BACnet projects (based on standard [...] 2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx to a not compatible PCD.
BACnet FW and coresponding PCD FW for PCD1.M2xx0, PCD2.M4x60, PCD2.M5xx0, PCD3.Mxxx0, and PCD3.Mxx60. The FW =< 1.26.xx does support the BACnet standard revision 9 . Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx to a not compatible PCD.
Package does include the FW for the PCD1.M2, PCD2.M5, PCD3.M and the BACnet FW. This firmware does support the modules PCD7.W600 and PCD7.R610 Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
BACnet FW and coresponding PCD FW for PCD1.M2220-C15, PCD1.M2160, PCD2.M4x60, PCD3.Mxx60 and PCD3.M6880 The FW >= 1.28.xx does support the BACnet standard revision 14. This firmware should [...] this release The Memory Module PCD7.R562 or PCD3.R562 is required to run this FW (PCD7.R560, PCD7.R561, PCD3.R560, PCD3.R561 are not supported anymore) Existing BACnet projects (based on standard [...] 2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx to a not compatible PCD.
