Ihre Suche ergab 573 Treffer

531. BIM - Accessories for PCD3 - Plug "F"

     Relevanz:

      

     10%

     Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O spring terminal block, 12-pole up to 1.5 mm2, labelled 1 to 12, for manual control module PCD3.A810, connector type "F";

532. BIM - Accessories for PCD3 - Plug "C"

     Relevanz:

      

     8%

     Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O spring terminal block, 2x12-pole up to 1.0 mm2, labelled 0 to 23, for modules with 16 I/Os or relay module ..A251, connector type "C"

533. BIM - Accessories for PCD3 - Plug "BG8"

     Relevanz:

      

     9%

     Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O screw terminal block, 8-pole up to 2.5 mm2, labelled 1 to 8, for PCD3.M9x and PCD3.C9x green connector type "A"

534. BIM - Accessories for PCD3 - Plug "BG10"

     Relevanz:

      

     9%

     Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O screw terminal block, 10-pole up to 2.5 mm2, labelled 1 to 10, for PCD3.M9x and PCD3.C9x green connector type "A"

535. BIM - Accessories for PCD3 - Plug "B10"

     Relevanz:

      

     8%

     Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O screw terminal block, 10-pole up to 2.5 mm2, labelled 0 to 9, for modules with 4, 6 or 8 I/Os, connector type "A"

536. BIM - Accessories for PCD3 - Plug "A9"

     Relevanz:

      

     11%

     Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O spring terminal block, 10-pole up to 2.5 mm2, labelled 0 to 8, for PCD3.F240, connector type "A9"

537. BIM - Accessories for PCD3 - Plug "A10"

     Relevanz:

      

     8%

     Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O spring terminal block, 10-pole up to 2.5 mm2, labelled 0 to 9, for modules with 4, 6 or 8 I/Os, connector type "A"

538. BIM - Accessories for PCD3 - Plug "10-pin"

     Relevanz:

      

     9%

     10 Plug-in terminal blocks for the IEC-Controller PCD3.M6893 X0 – Communicatio interfaces: Slot A Plug-in spring terminal block, 10-pole, 0.14…1.5 mm2 (black block), labelled 0 to 9

539. BACnet firmware; firmware which is used in production and supports BACnet Rev.14

     Relevanz:

      

     7%

     2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx to a not compatible PCD. [...] BACnet FW and coresponding PCD FW for PCD1.M2220-C15, PCD1.M2160, PCD2.M4x60, PCD3.Mxx60 and PCD3.M6880 The FW >= 1.28.xx does support the BACnet standard revision 14. This firmware should only be used if BACnet Rev.14 is required in the application. To use BACnet Rev.14 it’s necessary to use PG5 2.2.235 or newer. Restrictions Older Revision of BACnet are no more supported on

540. BACnet firmware; firmware used in production and maintenance firmware and supports BACnet Rev.9

     Relevanz:

      

     10%

     BACnet FW and coresponding PCD FW for PCD1.M2xx0, PCD2.M4x60, PCD2.M5xx0, PCD3.Mxxx0, and PCD3.Mxx60. The FW =< 1.26.xx does support the BACnet standard revision 9 . Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx to a not compatible PCD.