Serial interface modules for PCD3.M3xxx/..M5xxx/..M6xx0 Serial interface module RS-232 up to 115.2 kbit/s, suitable for modem connection (connector type A included)
Version 2.6.200 für PCD7.L60x kann im FBox Selektionsfenster des PG5 2.0.200 "nach Funktion gruppiert" werden. PCD7.L602 und L603 welche bis Sommer 2010 ausgeliefert wurden, waren empfindlich auf dem Speisungsanschluss (siehe Dokument oben). Das ist mit Hardware Version 2.0 nicht mehr der Fall. PCD7.L643 wurde 2010 durch PCD7.L644 ersetzt (Reparaturservice bis Ende 2015). PCD7.L60x Raumregler Library 2.5.166 / 2.6.166 enthält eine Änderung erklärt in FAQ 101514 . PCD7.L60x Raumregler Library 2.5.165 / 2.6.165 enthält eine Korrektur erklärt in FAQ 101506
This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
Combined digital input/output modules for Saia PCD1 and PCD2 controllers Digital input/output module with 16 I/O, configurable either as inputs or as outputs in groups of four (4) Inputs : 24 VDC, source operation, delay 0.2/8 ms Outputs : breaking capacity 5…30 VDC/0.5 A
Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O spring terminal block, 4-pole up to 2.5 mm2, labelled 1 to 4, for light and shade control module PCD3.A860, connector type "G"
Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O spring terminal block, 2x3-pole up to 1.0 mm2, labelled 1 to 6, for light and shade control module PCD3.A860, connector type "H"
