Ihre Suche ergab 573 Treffer

31. BACnet

    Relevanz:

     

    8%

    PCD7.R56x PCD3.R56x BACnet-Module für Saia PCD2.M5xx0 / PCD [...] 7.R56x. PCD2 / Rxxx Gibt es bekannte Probleme beim [...] Tatsache, dass z.B. 10 Dateien mit einem Zeichen drin (die 10 Bytes insgesamt wäre) 10 Blöcke verwenden werden (die rund 10 kByte auf der INTFLASH ein PCD1.M2xxx oder ein "blau-flash-Modul"). Die

32. BACnet firmware; Latest maintenance firmware version which supports BACnet Rev.14

    Relevanz:

     

    7%

    2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx to a not compatible PCD. [...] BACnet FW and coresponding PCD FW for PCD1.M2220-C15, PCD1.M2160, PCD2.M4x60, PCD3.Mxx60 and PCD3.M6880 The FW >= 1.28.xx does support the BACnet standard revision 14. This firmware should only be used if BACnet Rev.14 is required in the application. To use BACnet Rev.14 it’s necessary to use PG5 2.2.235 or newer. Restrictions Older Revision of BACnet are no more supported on

33. BACnet firmware; firmware 1.24.02

    Relevanz:

     

    11%

    Package does include the FW for the PCD1.M2, PCD2.M5, PCD3.M and the BACnet FW. This firmware does support the modules PCD7.W600 and PCD7.R610 Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.

34. BACnet firmware; firmware used in production and maintenance firmware and supports BACnet Rev.9

    Relevanz:

     

    10%

    BACnet FW and coresponding PCD FW for PCD1.M2xx0, PCD2.M4x60, PCD2.M5xx0, PCD3.Mxxx0, and PCD3.Mxx60. The FW =< 1.26.xx does support the BACnet standard revision 9 . Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx to a not compatible PCD.

35. BACnet firmware; firmware which is used in production and supports BACnet Rev.14

    Relevanz:

     

    7%

    2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx to a not compatible PCD. [...] BACnet FW and coresponding PCD FW for PCD1.M2220-C15, PCD1.M2160, PCD2.M4x60, PCD3.Mxx60 and PCD3.M6880 The FW >= 1.28.xx does support the BACnet standard revision 14. This firmware should only be used if BACnet Rev.14 is required in the application. To use BACnet Rev.14 it’s necessary to use PG5 2.2.235 or newer. Restrictions Older Revision of BACnet are no more supported on

36. BIM - Accessories for PCD3 - Plug "10-pin"

    Relevanz:

     

    9%

    10 Plug-in terminal blocks for the IEC-Controller PCD3.M6893 X0 – Communicatio interfaces: Slot A Plug-in spring terminal block, 10-pole, 0.14…1.5 mm2 (black block), labelled 0 to 9

37. BIM - Accessories for PCD3 - Plug "A10"

    Relevanz:

     

    8%

    Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O spring terminal block, 10-pole up to 2.5 mm2, labelled 0 to 9, for modules with 4, 6 or 8 I/Os, connector type "A"

38. BIM - Accessories for PCD3 - Plug "A9"

    Relevanz:

     

    11%

    Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O spring terminal block, 10-pole up to 2.5 mm2, labelled 0 to 8, for PCD3.F240, connector type "A9"

39. BIM - Accessories for PCD3 - Plug "B10"

    Relevanz:

     

    8%

    Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O screw terminal block, 10-pole up to 2.5 mm2, labelled 0 to 9, for modules with 4, 6 or 8 I/Os, connector type "A"

40. BIM - Accessories for PCD3 - Plug "BG10"

    Relevanz:

     

    9%

    Plug-in terminal blocks for PCD3 I/O modules Plug-in I/O screw terminal block, 10-pole up to 2.5 mm2, labelled 1 to 10, for PCD3.M9x and PCD3.C9x green connector type "A"