: S-LabelCreator.htm Technische Reporte Good to know Die GSD / GSE-Datei Revision 1.13 behebt das Display-Problem der Skalierung für PCD3.W6x5, siehe FAQ 101397 E/A Module: Die E/A Module werden standardmässig mit einer Federkraftklemme ausgeliefert. Schraubklemmen müssen separat bestellt werden PCD3 LIO und PCD2.M17x: um Adressen zwischen 256 und 511 [...] PCD3 gelesen.W745 auf eine PCD3.T760? (FAQ #101697) Wenn die 4 Kanäle analog Carte PCD2.W745 dient auf eine PCD
.16.45 (PCD2.M5 und PCD3), siehe FAQ 101640 . Minimale Version des PG5 um eine PCD3.T665¦T666 zu konfigurieren ist PG5 2.0 SP2 (PG5 2.0.200). Wenn eine PCD3.T660 mit einer PCD3.T665 ersetzt wird [...] Ethernet-RIO-PCD3.T66x gibt es ein Diagnose Flag zur Verfügung, die verwendet werden können, um festzustellen, ob die RIO-Manager-CPU mit der RIO Datenaustausch ist. Jedoch bei der Verwendung von PG5 2.0.200 [...] level Device Configurator: Support new IO modules - PCD2/3.W380 - PCD2.G200 - PCD7.W600 - PCD7.R610 Fupla Define groups and separators in the Page Navigator view Several
This firmware is used in the PCD production and the PCD's are shipped with this firmware. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
FW for the PCD3.Mxxx0 This firmware does support the module PCD7.R610 Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
This firmware is used in the PCD production and the PCD's are shipped with this firmware. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx or newer to a not compatible PCD.
FW for the PCD3.Mxx60. This firmware does support the module PCD7.R610 Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
. 32 GByte, 2 Ethernet, 1 RS-485, 1 socket for PCD7.F1xxS communication modules, 1 USB Device port for programming and service, 1 USB host, 1 CAN port (20a and 20b) 2 interrupt inputs, 1 watch dog relay, extendable up to 1023 I/O. I/O Extension for: Slot 4 to 7 PCD3.C200, Slot > 7 HPCD3.C100, HPCD3.C200 Supported PCD3 - I/O Modules: Supported PCD3 - I/O Modules: Starting with firmware 3.0.0: PCD3.Ax, PCD3.Ex, PCD3.W2x, PCD3.W3x, PCD3.W6x, PCD3.W745
. 32 GByte, 2 Ethernet, 1 RS-485, 1 socket for PCD7.F1xxS communication modules, 1 USB Device port for programming and service, 1 USB host, 1 CAN port (20a and 20b) 2 interrupt inputs, 1 watch dog relay, extendable up to 1023 I/O. I/O Extension for: Slot 4 to 7 PCD3.C200, Slot > 7 PCD3.C100, PCD3.C200 as usual Supported PCD3 - I/O Modules: Supported PCD3 - I/O Modules: Starting with firmware 3.0.0: PCD3.Ax, PCD3.Ex, PCD3.W2x, PCD3.W3x, PCD3.W6x, PCD3.W745
