Input/output modules for Saia PCD3 controllers Digital output module, 2 x 3 relays, 250 VAC/2 A 'make' contact, without contact protection (connector type A included)
Beim Herunterladen eines großen Programms mit PG5 2.0.200 zu einem PCD1.M2xx0 oder PCD3.Mxx60 die Fehlermeldung "Befehl nicht akzeptiert: NAK-Antwort" kann durch den Downloader zurückgegeben werden.[autotranslated]
Plug-in spring terminal block, 2x5-pole up to 1.0 mm2 (orange block), labelled 0 to 9, also for PCD2.G200, connector type "K"
Measurement parameter: - 0…10V - 0…2.5V - 0…20 mA - Pt/Ni1000 (default) - Pt1000: –50…+400°C - Ni1000: –50…+200°C
Measurement parameter: - 0…10V - 0…2.5V - 0…20 mA - Pt/Ni1000 (default) - Pt1000: –50…+400°C - Ni1000: –50…+200°C
Measurement parameter: - 0…10V - 0…2.5V - 0…20 mA - Pt/Ni1000 (default) - Pt1000: –50…+400°C - Ni1000: –50…+200°C
Input/output modules for Saia PCD1 and PCD2 controllers Digital output module, 6 outputs, transistors, 10...32 VDC/2 A
The E-Line S-Series RIO modules are controlled via RS-485 from a S-Bus or Modbus master and enable decentralised automation using industrial quality components. The data point mix is specifically designed for applications in the HVAC sector.
.1GHz processor, 4 GB MLC (SSD), extendable 1 GB RAM --------------------------------------------- Interfaces 2x Ethernet RJ-45 2x (RS-232 + RS-485 combined in one Sub-D) 3x USB 2.0 (500 mA [...] To PCD7 / D5xxx (Windows CE) On a PCD [...] .0.1.0.esy” Why it is not possible to establish a connection to the VNC Server in case the application “BeVNC” is started on the PCD7.D5xxxWTA010? (FAQ #102003)
) PCD7 / D5xxx (Windows CE) On a PCD [...] .0.1.0.esy” Why it is not possible to establish a connection to the VNC Server in case the application “BeVNC” is started on the PCD7.D5xxxWTA010? (FAQ #102003) [...] . Why it is not possible to ping a PCD7.D5xxxWTA010 from a remote device using the IP-Address of the panel? (FAQ #102002)
