Due of an error in the hardware the first series (hardware version A and B) of the PCD2.M4x60 is not able to use the PCD7.W600 analogue input module. The error was fixed in the hardware version C of
Due of an error in the hardware and the firmware the first series (hardware version A and B) of the PCD2.M4x60 is not able to use the analog/ISDN or GMS modem which is connected to the RS232 of the PC
It could happen that the web-pages showed on the microbrowser of the PCD7.D5xxxTL Geode CE panel is frozen after some time. The values are no more update and it’s no more possible to make something.
Due of an error in PG5 2.1.430 the function ‘Add Files’ on the project manager, Program Files menu does crash the project manager as soon as a selected external file should be added to the project.
Due of a error in PG5 2.2.130 it's not possible to map in the BACnet configurator analogue values to PCD medias. This error is fixed since the Hotfix 1 of PG5 2.2.130 or since PG5 2.2.140
Due of an error in PG5 2.2.130 it’s no more possible to manipulate/force the F-Box internal adjust parameters from scada or web page of the 2 above mentioned F-Boxes and therefore it’s not possible to
There are a couple of common causes in case of a lack of communication. Please take care of the points mentioned below.
Following modules have status visible directly on the device and in the symbol. This Faq does explain the meaning of each status. This is valid for the following modules. (L-Series) - PCD1
Yes it’s possible to use BACnet on both ports ETH1 or ETH2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate
Due of an error on the firmware installed on the PCD2.W6x5 card with fabrication date between 1835 and 1845, the PCD2.W6x5 card doesn’t work if they are plugged on PCD2.C1000 or PCD2.C2000 extension m
