Due of an error in the hardware the first series (hardware version A and B) of the PCD2.M4x60 is not able to use the PCD7.W600 analogue input module. The error was fixed in the hardware version C of
Due of an issue on the production, some of the PCD2.C1000 and PCD2.C2000 produced between the week 20 and week 36 of the year 2021 where not equipped with a red jumper on the board of the PCD2.C1000/P
If the user want to access the setup menu of the P-Web panel, then it’s possible that the application program on the P-Web panel crash/reboot and the access to the web-page is no more responsive.
Most probably the reason of the problem is in the settings of the DCOM. If on the DCOM settings the application is defined as “Launching User” then this will invoke the start of multiple instances o
Situation: The PCD is configured as Modbus client with the Saia-Modbus client F-Boxes and you have to communicate over Ethernet with a Siemens S7-314C-2 with the Modbus protocol. Randomly, some r
The external MPI adapter which can be connected to the MPI Port of the PCD does need to be supplied with 24VDC. Depending of the hardware version of the PCD, on some FW this 24VDC supply on the MPI d
To power on the PCD8.K120 Profi-S-Link adapter you have to enable the Profi-S-Bus of the corresponding port on the "Profi-S-Bus" folder of the PG5 Hardware settings and you have to downolad the Hardwa
The supplier of the power supply has changed the color of the LED installed in the power supply from red (old) to green (newer devices). This change was done to have a better identification of the
Together with the official PG5 2.2.140, Web Editor 8.3.0.740 was released. On this version there is a bug that lead to the situation that the properties window is empty or tabs of the properties win
