For going online with PG5 using PGU mode a special cable (PCD8.K111) is needed. What is the difference between a normal crossed cable and the PCD8.K111)?
In the M-Bus library for the SBC Energy Meters (which can be installed for PG5 1.4, PG5 2.0 and PG5 2.1) the following modifications have been applied.
With PG5 2.0.220 the EnOcean FBox library version 2.6.147 is delivered. This FAQ lists the main modifications to this FBox library.
In the two tools PG5 and the FBox Builder it is possible to define "dynamic ressources". Although the name of these ressources is very similar, these address distribution is not identical for these re
There are several bus protocols that are called "C-Bus". Depending on the system, another philosophy to connect it to a Saia PCD® is to be choosen.
In some cases the support team is asking you to provide more detailed information regarding a problem you report. This FAQ contains a list of relevant points which are most likely needed in order to p
The I/O address 255 is used for the hardware watchdog. Due to this fact this address can not be used as "common" input or output as written in the chapter "Hardware watchdog" from the PCD3 manual.
In the Device Configurator there is a parameter "Extension memory backup size". Using this parameter the size of the memory for backing-up DBs in runtime (in IL) was configured for firmware versions b
The SBC Web Panels CE are shipped together with a 64 MByte or a 128 MByte Compact Flash Card (CFC). However, in case more capacity is required, also bigger cards may be used.
