In february 2010 a new firmware version for the systems PCD2.M177 and PCD.Smart.M177 has been introduced into production. The reason for this introduction is that a new type of flash is used on the PC
If you need to order separetly the onboard battery module of the PCD3.M5/6 CPU (which is normally part of the standard delivery of a PCD3.M5 or a PCD3.M6) please use the following article number: 4 63
The PCD7.L640, L641, L642 and L644 room operation device does have a integrated temperature sensor. The temperature sensor accuracy value depends on the measurement range. The measurement is more a
The PCD3.Mxxx7 do use the TCP/IP port 102 in relation with the TCP/IP communication from/to Step7
By default the S-Energy manager (PCD7.D4xxE) does have the S-Bus address 2 as written in the manual.
We strongly recommend using the FBoxes for analogue modules! In case this is not possible, please refer to the example project "Reading analogue input signals in Instruction List" on the "Getting Star
The "secure S-Bus Data Mode" has been introduced in order to clearly identify a Serial-S-Bus response telegram as answer to a certain request telegram (by introducing a sequence number). This FAQ expl
The WebServer2 is a re-implementation of the previous WebServer on Saia PCD® COSinus systems and of course compatibel to the previous version.
Newer PCD types and newer PCD7.D4xx devices have micro-SD memory card (uSD) on the PCB (printed circuit boards) The following data’s are stored on the this uSD card on the PCD’s PCB: Firmware f
