The transparent snap-on clip of a PCD3.R600 is the same article as the snap-on clip for the inscription labels of the PCD3 I/O modules.
Due of the housing of the connector of the PCD2.K1.. extension cable a minimum distance of 6 cm is required between the PCD2.M… CPUs and PCD2.C1.. extension rack, if the extension rack PCD2.C1.. is pl
The minimal hardware version of the PCD4 power supply modules PCD4.N2x0 which can be used together with a PCD4.U100 upgrade kit is hardware version "B".
Beginning in May 2010 (calendar week 18) the PCD7.R400 have been equipped with a new flash memory component because the previously used type has no longer been available on the market. This FAQ conta
It’s possible that after a FW update of the PCD to the FW 1.20.xx, 1.22.xx or 1.24.xx there is a entry in the FW history ‘FWDnld UnknownFW’ after the history line ‘FWDnld 1.2x.xx PLC CLASSIC’ as shown
Following modules have status visible directly on the device and in the symbol. This Faq does explain the meaning of each status. This is valid for the following modules. (L-Series) - PCD1
The maximum of exchanged data over a Profibus DP interface (or Profi-S-I/O) interface is depending on the system (the amount is not the same for a PCD7.F750 or a PCD3).
Currently the latest version of PG5 2.0 is the version 2.0.220.
