If the PCD2.F2610 or PCD3.F261 Dali communication modules are used: There is no need to use a Tridonic interface. The whole DALI configuration is done with the Dali F-Box over the F2610/F261 modules
As PG5 is an important topic there is a seperate PG5 folder in the root of the FAQ Manager.
In some cases the ASCII table can be useful for generating projects with PG5. E.g. for applying the "Root vaiable ASCII" from the HMI Editor.
There are two ways for creating sub-macros for your FBox. They can be defined directly in the FBox Builder (in the Macro tab of the Library Manager) or in a file that will be included to the library.
The library of the "RAG Einzelraumregelung" (for the obsolete product PCD7.L71x) is not distributed with recent PG5 versions. In case a project is to be updated and this FBoxes are still needed, pleas
In case you would like to use the icons from the HEAVAC S-Web Demo or from the DDC Suite template projects you can download them from the support site.
The article 450748150 is no longer available from Saia-Burgess Controls AG as the according displays have been phased-out. However, this article can be bought from other providers (it is a Lithium bat
In case connectors for the PCD7.L62x modules are required, please refer to "Good to know" on the room controller section on the support page (link below).
The PCS1 with GSM option and the Q.G736-AS2 are delivered without antenna for the GSM terminal. The antenna is not delivered because the selection of the antenna type it is very much depending on the
