The IL instruction DSP (display value on PCD7.F530 display) is not supported on Saia PCD® COSinus systems. When downloading it to a Saia PCD® COSinus system, the PCD will not go in RUN and give an err
If PG5 was installed on a PC after Visi.Plus, the menu "Saia PG5®" won't be activated!
In case the image version (eWin_CE5.0_cf128_D5xxxTX_2.0.31.1.esy) of the CE_Panel (PCD7.D5xxxTX) is used, data seem to be continously loaded but not displayed (when using the macro for the "HDLog to F
Upgrade from PG5 2.0.210 to PG5 2.0.220 does not let go online with a Project done with a previous version: Message "The program needs to be rebuilt and download" is displayed. The same happens wit
This problem was related to a font unsed by the HMI-editor 1.4.170 which was not supported by every Windows system.
The page is properly displayed but instead of the values from the PCD a syntax error is indicated.
This error message appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3).
If the master box doesn't recognize the address transmission then the master box gives the message "Timeout".
This is related to a firmware problem in the PCD3 FW 018. Update to the next official version.
If a software box is placed to communicate with a wrong actuator type, the message "module type" appears into the master box.
