If an EPROM of a programm with IP-address is made with PG5 1.3.120 the IP-adresse will not be stored in the EPROM (Hex-File)
The page is properly displayed but the values are not refreshed anymore.
With firmware 1.12.01 for the VGA panel (PCD7.D4xxV) it is not possible anymore to choose the numeric keyboard as default. At every power off/on this setting is lost.
The output of the L60x Room Controller FBox switches from 1 to 0 when the temperatur setpoint is modified. This phenomenon appears on the new hardware V2.0 and SW 1.12!
The first versions of the PCD3.M5340 controller have been delivered with a firmware that does not support the usage of the RS485 port on port 3.
When using a PCD7.F772 or PCD7.F802 on a PCD2.M1x7 with FW Version 3.110 only the RS 485 communication works. Otherwise the Profibus / LON communication did not work.
This is usually the case if you are not connected in full protocol.
On some older hardware versions the SD card is only recognized at power on of the PCD but not in run time of the PCD.
In the manual of the PCD2.H110 you can find an example of automatic period measurement where the XOB 20 is used for reading the measurement continuously. This example doesn't work on a PCD2.M480 due t
