When having installed PG5 2.0.110 on a PC running Windows Vista (or probably Windows 7) it is possible that you are informed that an Add-on tool (e.g. the S-Web Editor or the BACnet Configurator) has
The message: "The program contains features which will not run on this PCD..." appears when trying to download after a successful build.
The browser or microbrowser does cash the loaded offline trend lines into an own memory. This leads to the behavior that on the browser more data points than stored on the PCD memory can be displayed.
In PG5 2.0.150 sometimes the following error message appears on execution of "Copy user program to flash": "Failed to copy to/from flash. Check Flash Memory or card is fitted".
In very rare cases it can happen that the screen of a QVGA MB Panel PCD7.D457BTCF (black/white) remains black and the backlight is no longer switched on (only if firmware 1.10.45 is installed).
The scroll bar and some menu lines are missing in HMI editor
In case user program is restored from flash with a PCD3 or PCD2.M5540 with firmware 1.16.xx it is possible (depending on the device configuration) that the restored user program is not complete.
The reason for the warning is not clear. If a doubleclick on the warning is done it jumps on the first fupla page without indicating where the problem comes from
The web page is properly displayed but instead of the variable value the text "No component selected" appears.
After a succesful download the PCD3 or the PCD2.M5xx0 doesn't go in run. It stays in HALT in XOB 16.
