When you try to import a previously exported Fupla page in PG5 2.0.200 then the static symbols aren't shown in the Symbol list window of the import dialog.
If BACnet is enabled in a DDC Suite project a BACnet flash module must be installed because the I/O are treated differently by the DDC Suite FBoxes.
Normally the internal symbols of the FBoxes for the PCD7.L60x should be inserted in the global symbol list as soon as the FBox is placed in the project. If this does not happen you, have to change you
The problem may be related to a loose contact on the PCD3.K010 connectors used to connect the PCD3.M/Txxx CPU's and the PCD3.Cxxx expansion modules.
It is possible to use the interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB.
In PG5 2.3.175, due to a bug in Web-Editor8 when compiling the Web-Editor8 project (as HTML5 or Hybrid solution), all horizontal and vertical lines of the Web-Editor project were ‘crooked‘ by 1 pixel
If the memory card is not present the file system FBoxes seem to work as usual. They are still green and no error is indicated
If the CE panel is rebooted the configured stations in SWebConnect get lost.
All the application is working correct with no error indication, nevertheless, the Alarms aren't displayed in the Web Alarming list. The list remains blank and no columns are visible as on the picture
An alarm is activated but once it has been acknowledged and isn't active anymore it isn't memorized in the buffer!
