There are different status (p.e off/on/auto) it is possible to scroll, otherwise when pressing enter the status always jumps back to "off"
The PCD7.LRxx-P5 IRM room controller can be operated on the RS485 interface as an S-Bus master. The PCD7.LRxx-P5 IRM room controller supports all S-Bus telegrams except the 2 telegrams: R
In case the online Help for the FBoxes can not be opened the reason could be that the file HHCTRL.OCX is not up to date.
When working with a Siemens 5WG1 148-AB04 connected on e.g. a PCD3.F121 module, the following points need to be considered for successful operation.
After installing the patch 8 for PG5 it is no more possible to compile a project which contains FBoxes for Bettschen midi RIOs.
The FBoxes of the Modem- or Heavac-library (HVC, CVC or HLK FBoxes) must be placed in a cyclically called program block (but not in an XOB or SB!). The reason for this restriction is the initialisatio
It is possible that gaps in trend from logs are visible in the browser if the "load info & data" of the macro "Trend" is executed after a longer time interval than the data memory size available in th
If the MB VGA panel is connected over serial line (RS232 or RS485) to a PCD and the baud rate is set to 9'600 Bit/s (or even less), the timeout on the MB VGA panel is to be adjusted to 500 ms.
The symbol editor allows the possibility to initialise ressources using the syntax :=100 (for a Register) in the column "Adress/Value" but when the CPU goes in RUN the register value is overwritten b
If a webconnection is established over modem with the current Webconnect 2.0.18.2 the webpages is displayed, otherwise the values are missing.
