This FAQ explains the possibilities in case a PG5 project is not available but still an existing application needs to be modified.
Yes, this is possible with firmware version 1.10.15 and later.
No, as such a definition would be ambiquous as the square brackets are used to define an array but also as indication of the offset inside an array.
Belimo does offer new 6-way valves which can be controlled with a 0..10 V input (0..3V: heating; 3..7V: dead range; 7..10V: cooling). These valves can be driven by a PCD7.L6xx room controller.
An energy meter ALE3 or AWD3 does always show the consumed energy (as physical variable) on the LCD display on its front. It is also possible to temporarily display e.g. the instantaneous power measur
No, it's not allowed to load a PCD3 xx7 with a firmware SBC standard operation system.
The eXP Panels PCD7.D6xxxx are by default delivered with the eXP image installed and configured in English language. In case another language is preferred, it is possible to change the language to eit
By default the DB 3999 is used as "unique program identifier". In some special cases it might be necessary to change this address. This FAQ describes how this is done.
Yes, a new set of instructions for calculation with IEEE floating point values (single and double) has been added to the firmware of PCD2.M480, PCD2.M5xx0 and PCD3.
In case you are interested in updates of the support site (www.sbc-support.ch or alternatively www.sbc-support.com) you can subscribe to the RSS feed which is available for this site.
