There is a new version of the lable creator available. We recommend to use the newest version, since in the old one were a few problems and some lables where not correctly created.
There are some problems with EDE files of a few manufacturers, because they are not in the right format.
It is possible to use the interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB.
Formating problems may prevent the displaying of texts which are defined inside CSV files.
In case a PCD2.R6000 (with a hardware version / modification before B1) is plugged on a PCD2.M5 which is extended with a PCD2.C2000 the file system on the SD card is not accessible.
There are various possibilities to plug flash memory modules (PCD7.R500, PCD7.R550M04, PCD7.R551M04, PCD7.R560 and PCD7.R561) on the CPUs.
In principle, it is possible to use RS422 as physical layer for Serial-S-Bus communication. But note that the S-Bus full protocol is not fully applicatively due to the reason described below!
You will need the MP-Bus FBox Libary and a communication card supporting the Belimo MP Bus.
It's possible to get connected to and to program a PCD that is placed behind a Gateway of another PCD. There are some Device-, Timeout- and Connection-Settings to be taken into consideration. This han
There are a lot of different Belimo actuators and it isn't always easy to find the correct FBox which does fit to the Belimo device. Especially for the new Belimo devices, not yet present in our doc
