Your search returned 4797 results

3881. The card PCD3.F281 does not work correctly with the library Belimo 2.5.300.

      Relevance:

       

      100%

      The library Belimo 2.5.300 does not work with the card PCD3.F281 if you use the both channels of this card.

3882. The clock of the PCD is incremented (1 hour) at each startup

      Relevance:

       

      100%

      This is a bug in the HEAVAC library.

3883. The correct syntax for files and directories is necessary on the filesystem

      Relevance:

       

      100%

      If the file- or directory- names are not correct, this will lead to errors.

3884. The cos phi values aren't correct on phase 2 and 3 on AWD3D5WS00CxA00 energy counter!

      Relevance:

       

      100%

      On energy counter AWD3D5WS00C3A00 and AWD3D5WS00C2A00, the cos value on phase 1 ist correct but not on phase 2 and 3. All other values are read correctly.

3885. The data exchange to smart RIO does not work with certain FW version!

      Relevance:

       

      100%

      When the smart RIO PCD3.T665 (or T666) with FW 1.20.36 is connected to a smart RIO Manager PCD3.Mxxx with FW 1.16.69 then the data exchange doesn't work!

3886. The default standby mode "DTMF+PGU" doesn't work properly

      Relevance:

       

      100%

      The modem library offers the possibility to use the modem for an online connection and alternatively for giving commands using DTMF. In this case the PCD has to decide whether the incoming call is a d

3887. The device configurator does not work in PG5 1.4 or the project manager PG5 2.0 does not open at all.

      Relevance:

       

      100%

3888. The error LED is on and the history contains the message XOB 20 / 25 missing

      Relevance:

       

      100%

      XOBs 20 and 25 are called when interrupt input INB1 or INB2 of the PCD1/2 has detected a rising edge.

3889. The error message: "Configuration too large appears" if a Saia PCD® Slave is added to a network

      Relevance:

       

      100%

      If the master is a PCD2 with a PCD7.F750 the maximal configuration is 2942 Bytes I/O. When adding a SBC Slave to the network this limite is reduced to 2048.

3890. The init-string with PIN-code for the GSM modem (G736-AS2) does not work on the PCD3

      Relevance:

       

      100%

      If the PIN-code is activeted on the SIM-card the following init-string is needed: ATS0=2+CPIN=nnnn\r Unfortunately this string does not work on the PCD3.