In order to synchronize all PCD clocks on a network (Serial S-Bus, Profi-S-Bus or Ether-S-Bus) the FBox "Broadcast Clock" from the standard family "Communication" may be used. Depending on the range
Yes. This switch makes a refresh of the signal and the switchs can be used in cascade. The maximum distance between one switch and another is 100m.
There is a security function that causes a modem to be "blacklisted". This happens after twelve call attempts in a row weren't successful. Once a modem is "blacklisted" no further calls may be initia
The first serie of PCD2.T814 modems with baseprint firmware < V1.09 have a problem when using the modem in the Hardware Settings for programming, for sending SMS and for DTMF at the same time.
At the moment it is not possible to connect to several PCD's at the same time using the S-Bus USB channel.
Principally, there's no limitations set by the driver itself ...
Priority 6 is reserved for time operations for BACnet objects like minimum on time or minimum off time.
Our USB driver cannot be installed, if is F-Secure Antivirus installed on your PC The same behaviour occurs also if the Comodo Firewall is installed on the PC The same behaviour occurs as well if th
Yes, it is implemented in the PCD3 with FW Version $12 or later. On the PCD2.M5xx0 it is supported with every firmware
On a Profi S-Bus network when PCD7.D76_ terminals are connected to PCD3.Mxxx or PCD2.M480 PLC's over Profi S-Bus, the terminal loses the communication after some time and get even frozen. This problem
