The message "File not found!" together with the name of the HTML file is shown when connecting to the PLC via Ether-S-Bus, Profi-S-Bus or Serial-S-Bus. When connecting via HTTP direct (Ethernet) every
There are several reasons listed below why your start page may not be displayed
From May 2009 to April 2010 the QVGA MB Panels PCD7.D4xx have been delivered with firmware version 1.08.52. This FAQ lists the main changes which have been implemented in the firmware 1.10.45 and 1.
The library Belimo 2.5.300 does not work with the card PCD3.F281 if you use the both channels of this card.
PG5 1.4 cannot be installed due to a message "Error 2711: The specified Feature name ( ... ) not found in Feature table".
Basically the FC's and FB's from the Siemens Library are supported. Otherwise if the FC / FB is made for a function that does not exist on our CPU, it will not work.
If the MB-panel is connected to the RS 485 port the default timeout has to be adjusted for low baudrates
In general No, except if you use the Modbus2 library.
It was not possible before the MP-Bus library 2.5.300 which was distributed with PG5 1.4.300.
Inputs / Outputs < 256 are in the process image and are read cyclic. The access can be per example: L IW 128 (Load Input Word 128) Inputs / Outputs > 256 are not in the process image and can only b
