Yes, this is possible with firmware version 1.10.15 and later.
Due to incompatible communication parameters used by the Omnio "RS232/485 to EnOcean" converters the FBox library version 1.0.0 is not working in every situation with the converter from Omnio.
While launching the FBox Builder the validity of the license for PG5 (and for the FBox Builder) is checked. If this validation fails, the FBox Builder cannot be started.
There are error messages displayed for each old FBox that it should be replaced.
Yes, this is possible. In the modem settings there is the option "auto disconnect after x minutes". Just below there is a radio button with the choices "when idle" or "always, do not reconnect"
The lenght of the symbolic name of the PCD text variable which is used in the 'dir' field of the F-Box 'HDLog File 3.0' and does point to the location of stored csv file is limited to 39 characters. I
Since the FBoxes of the HVC (HeaVaC) Library require the HVC-INIT FBox before they are compiled, the following points are to be considered.
A broadcast to the DALI Bus does reach all lights/devices on the bus. But how is it possible to create groups and how can individual devices be addressed?
When creating a package (self extracting installation) by using the function "Crate package" of the menu "Library" the entries on the installer window might be different than edited in the tab "Setup"
When using the Log to File Advanced FBox, an Error 116 "Invalid constant" occurs during build.
