The modul PCD3.W745 is missing in the IO Builder version 2.003.000
Due of a firmware error on the COSinus FW 1.20.25 it’s not possible to communicate over RS232 on the port 0 of the PCD2.M5440 and port 1 of PCD3 CPU’s, but only on PCD’s without Ethernet port.
On the PG5 device configuratior it’s possible to activate/deactivate the RS485/RS422 Bus termination of the port 3 (D-Sub #2 connector; RS485/RS422) of the PCD3.M5340.
The DDC-Suite F-Box "Init ABS" allows to define a antiblock protection for pumps and valves. If the criterias to switch on the antiblock protection is true, the antiblock protection is switched on
Because new instructions have been defined, user programs with Heavac Dialog FBoxes can in some cases no longer be built.
This error message can have two reasons; one caused by a TCP connection which has been closed by the server, of if the S-Bus connection is not working correctly.
If you need to order separetly the onboard battery module of the PCD3.M5/6 CPU (which is normally part of the standard delivery of a PCD3.M5 or a PCD3.M6) please use the following article number: 4 63
Due to an error in the PG5 device template file of PG5 2.0.200 it’s not possible to switch on/off the digital outputs of the PCD3.compact CPUs. (PCD3.M2030V6, PCD3.M2130V6)
Due to an error in the PG5 device template file of PG5 2.0.200 it’s not possible to switch on/off the relay outputs of the PCD3.WAC CPUs. (PCD3.M2230A4T5, PCD3.M2330A4T1, PCD3.M2330A4T3, PCD3.M2330A4T
On the CPU PCD2.M480 can be plugged two PCD7.F655 Ethernet cards. This feature allows you to program either Ethernet redundancy by creating an reduced "IP Firewall" or to realise an Ether-S-Bus to Eth
