When building a project with HDLog FBoxes the build fails with the message "Down.wsc Line xxxx Symbol not defined_stc_id_0016_var_00" or similar can be caused by an incorrect setting in the Fupla opti
After an update of the project from PG5 1.4 to PG5 2.0 (if in the S-Web Editor project a Heavac template "Set-point ramp" or "Setp-point slide" is used) the symbol A.HVC.FBox_Name.SetPt can be missing
Some manufacturers (like Siemens) use proprietary BACnet Objects.
There are some problems with EDE files of a few manufacturers, because they are not in the right format.
In case the FB parameter checker from PG5 2.0.150 is not able to identify the type of an FB parameter this error is generated while linking the object files to the pcd file.
When placing an FBox "PCD7.D120" it is not possible to build the project anymore with PG5 1.4.300 due to a syntax error.
When I load the content of my remote PLCs Webserver I get a pop-up window with a security information and following warning: "The application's digital signature has expired".
Communication on port 3 (PCD2.F520) during startup can lead to a DUART HW ERROR on the PCD2.M150
When trying to write a text (with address higher than 4000) using the S-Web Server, the PCD system stopps working and in the PCD history a "68k add Error" is indicated.
The constellation of the CPU of the PCD2.M5540 and the on-board switch which is leads to the situation that (very few) telegrams may be lost. This fact can lead to the situation that the Error LED of
