After an Ethernet module has been replaced (and the IP address remained the same), it is often not possible connecting to the according PCD. The reason is that the PC "remembers" the old MAC address (
What does the output format "1:1" in the FBoxes for temperature sensors (PT1000/NI1000) mean?
If the "MDLS144/288 Data9600 onbit" modem is connected to a "non Saia PCD® COSinus" system (PCD1.M1, PCD2.M1) then it's possible to establish a modem connection to those systems but if the same modem
If for example a Scada system communicate over S-Bus slave gateway port or S-Bus PGU port with a slave station via a master gateway port then after a programm download to the gateway PCD (or if the ga
With Firmware Version 1.201 the program who was stored in PCD7.R400 was not automatically copied into the PCD’s memory when the PCD2.M487 was powered off/on without battery.
Yes, it is possile storing files directly on the flash File System of an MB Panel. By doing so, the page will be displayed faster because these files do not need to be transferred over the communicati
On the attached example you can see, how the RTC of the PCD could be displayed and modified on a Web-page. Also it's possible to know, if the PCD is running or is stoped.
In July 2010 the firmware 1.14.23 has been introduced into production for the PCD2.M5xx0 and the PCD3.Mxxx0. This FAQ lists the main differences between versions 1.10.51 and 1.14.23.
