In case a "non Saia PCD® COSinus" PCD or PCS1 system is connected with "Secure S-Bus Data mode" (e.g. over a serial cable or over modem) from time to time a telegram is not answered correctly.
It is necessary to load an MSN (multi subscriber number) to the ISDN modem, if differend devices are connected on the same line.
With firmware 1.12.11 for the 10" VGA MB Panels the touch screen sensitivity has been configured rather insensitive. This configuration has been improved with firmware 1.18.28 (while already the versi
The error message: cgi order values failed appers and "No Message" is displayed instead of the PPO value.
This RIO modules need some time to synchronize the baudrate and establish communication.
PCD2.M5xx0 and the PCD3.Mxxx0 systems equipped with firmware 1.10.16 did not correctly calculate the temperature values of NI1000 temperature sensors measured with PCD2/3.W340 input modules.
Together with PG5 SP1.4.130 a new version of the "Historic Data Logging" FBox library has been distributed. Due to a small bug the FBox "HDLog Init" causes this error on build of the PG5 project.
If you run on your PCD7.D61xxTL010 eXP panel with 512 MB main memory the internet explorer and use the applet 5.15.02 (or later) with standard *.html settings of the WebEditor, you might face the foll
When reading values from some specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the devic
In some cases this error has been reported after the installation of the Patch 15 for PG5 1.4.300.
