The DALI FBoxes offer the possiblility to access the lights with broadcast (every light on the bus), short (just a single light) or group (a defined group of lights). This different addressing is only
Changing the Profi S-Bus settings puts the CPU in HALT with a BUS Error
With PG5 1.4.120 and PCD3.M5/M6 it is not possible to use the internal backup memory
As the hardware probes do work as USB dongles for the software Serialtest Async (version 10.12.22.0 and later), the according USB drivers need to be installed before starting the installation of the s
Yes they are and starting in PG5 1.4 these modules are included in the S-Net Configurator by default. When using PG5 1.3 an import of a recent version of the GSE (or GSD) file is necessary. The firmwa
When using the internal sensors of the PCD7.D290 it has been noticed that the the pratical measurement accuracy is below the indication of the corresponding manual (26/841).
As described in FAQ 101479 the version 2.6.xxx of the Engiby libraries is required for PG5 2.0.150 (PG5 2.0 SP1). This FAQ contains the link to download the libraries (in order to have a fast solution
The used of the internal flag S.HMI.ALACLEAR works but there is always 1 alarm left in Buffer and the only way to clear it is to download the user programme again. This situation is caused due to a sp
There is a an item called "Set station active" in the communication buffer which default value is 0. This causes the OPC server to disable the connection to the concerned PCD(s). The result is a commu
Analysing Serial-S-Bus communication can be done in several ways, depending on the focus of analysis (what shall be analysed; the telegrams on the wire, the requests sent by a PC software or the signa
