The outputs of a PCD2.W525 or a PCD3.W525 need to be configured correctly. If this is the case, it is possible that a problem in the FBox leads to the fact that the outputs are not written correctly.
Depending of the hardware version of the W6x5 module and the I/O slot where the W6x5 module is plugged in, it’s possible that the analog output signal supplied from the W6x5 is not stable and is oscil
The onboard outputs "Out0" and "Out1" of the PCD2.M5xxx are not working on hardware version "B" and "C".
At the moment the FAQ Newsletter contains wrong links when opening a mail with Lotus Notes. We are currently investigating this issue and expect it working correctly for the next newsletter.
It may happen that the 0..10V analog outputs of the PCD3.W800 cards 'freeze' to a random value during operation and cannot be controlled by the user program. We are currently analyzing the trigger fo
Spaces in texts get displayed as "+" when the option "Encode Special Chars" in the Web Editor is disabled or if a 'old' version of the IMasterSaia5_15_02.jar file is used.
Some M-Bus devices (so far only observed on a MBus water counter from the company Allmess / Actris) are very sensitive against inter-character delays.
The configuration of the PCD by storing (on a flash file system) the files "WebSocketConfig.txt", "FTPConfig.txt" etc... does no longer work once the configuraiton has been done by the Device Configur
It can occur that the value measured from the PCD2.W3x5 / PCD3.W3x5 modules 'freeze' during a time of about 1 to 2 minutes. Afterwards, the modules function again and the measured analog input value
This phenomenon could be caused by a missing power supply or if the current consumption of the I/O modules exceeds the maximum supply of the extension module. A missing jumper inside the PCD3.C200 can
