By using the CGI interface from the PCD it is easy to read or write values from a PCD over Ethernet (or using SBC.Net WebConnect).
Firmware versions before the version 1.10.51 were not supporting retries during the "Upload/Merge" process of the BACnet configurator. In case a telegram got lost during upload of the BACnet configura
Yes, the FBox Family "Modem" features an FBox "Read GSM Level".
The diagnostic flag Slave_Err does indicate that at least one Profibus slave has an error. The error could be that the slave(s) is/are not connected to the Profibus network or that the slave(s) is/ar
When downloading a recent PCD3 firmware (e.g. 031) over e.g. USB it can occur that the error message "Download failed on END command" is shown at the end of the download. The LEDs of the PCD remain bl
The same application was working properly with PCD2.T813 before.
The Pager from TCS is inactice since 29.05.2013 To activate the Pager, Call Hotline: 0848 88 99 99 from Swissphone (www.swissphone.com)
When connecting M-Bus devices to a PCD there are some points to be considered already during planning and commissioning. This FAQ refers to a list of points to check when realizing and trouble-shootin
The port numbers which have to be used on Step7 depends on the used communication module and on the place where the module is plugged in to the PCD.
