If the master box doesn't recognize the address transmission then the master box gives the message "Timeout".
The BACnet Configurator distributed with PG5 2.0.110 contains references to dll libraries at a wrong place, which leads to error messages like "Cannot find SymDlg52.dll". Installing the patch below cu
In some special cases (e.g. if the WebConnect system tray icon has been disabled) it may be necessary to figure out which port the WebConnect is using for answering requests (the listener port).
It's a well know fact that you can easily access the Web Server of a SBC CE Web Panel PCD7.D5xxx with the default user "admin". In case this user has to be changed for security reasons, read this FAQ.
When using the FBox "Motor 2-speed 2.0" (or the "Motor 3-speed 2.0"from the FBox family "DDC Controls" with the option BACnet activated, it can happen that the motor does not change to speed 2 (but sh
If the alarm text is too long, the active alarms are not displayed at all (only in Microbrowser CE versino 1.5.10.82c and older).
Since BACnet objects vary heavily in the amount of properties and features it is not possible to define a number of supported BACnet objects per CPU. However, this FAQ contains a rule of thumb for the
The settings for Clock period High and Clock period low must be 2 / 150 same settings as for the PCD2.M480.
No, "DPV1" is not supported! It is absolutely necessary to chose the "S7-compatible" mode.
It is possible capturing the traffic on a Ethernet network and stop this capture based on a specific condition, like e.g. the lack of Ether-S-Bus telegrams from a specific station for a certain time.
