The display has a frozen screen (can be black if in standby mode) and can't be operated. After a powerup the project's start page is displayed but the touch screen doesn't respond, because the calibra
There is no FBox that allows to calculate the power of a number.
During the the build of the project, PG5 checks whether the HMI library is up to date with the version of the HMI with which the HMI project was created. If this is not the case, the build will be abo
New F-Boxes per example for the trending / alarming where installed in PG5. After the installation the F-Boxes are still not available in Fupla.
Yes, it is possible to connect one or two encoders with A, B and index signal directly to the onboard inputs of a PCD3.M2x30V6.
Important note: Since the PCD6 is phased out, it is not possible anymore to send the PCD6.M300 back for modification/upgrade.
Since May 2010 a new S-Web Editor version is available on the support site. The main differences of this version are listed in this FAQ.
If the last patch for the analogue library 2.6.100 was installed, the "Info" button will not show the help of the FBox anymore.
When working with PCD systems you will cross the expression "Saia PCD® COSinus" sooner or later. This FAQ explains what "Saia PCD® COSinus system" stands for.
On some older hardware versions the SD card is only recognized at power on of the PCD but not in run time of the PCD.
